GO Elliptical T-300MX, Руководство пользователя

Страница: 21 / 43

- 21 -
STEP 8 : Attach the Console Base and Handlebars
(A) As drawing shown set the CONSOLE BASE (131) to top of the Upright tube (68)
secure with three Screw (18)
(B) Use Screw (16) thru the holes locate with the center of the pre-assembled Fix
Handlebar (71) as drawing shown secure both screw(16 ) tighten up the Fix
Handlebar to the upright tune (68) There is a set of cable out from the
pre-assembled Fix Handlebar routing The cable thru the square hole locate on
the upright tube under the Fix Handlebar Routing the cable thru the upright tube
to set it under the console BASE
(C) Matching both front post covers ( #130A and #130 B) as photo shown Secure
the covers with four screws (# 135) together
#18 3
#135 4
#134 1
#6 2
#136 6
A
B
C