Go!Control Wireless Security System Скачать руководство пользователя страница 19

Страница: 19 / 52

Wireless Keypad Arming and Disarming

Your system may be equipped with one or more wireless keypads.
Up to four wireless keypads can be used to control the system
remotely.

Each wireless keypad has buttons for entering User Codes,

STAY

and

AWAY

mode buttons, and

FIRE

and

POLICE

emergency buttons.

Check here if the 24-hour

FIRE

and

POLICE

emergency buttons have

been enabled by the installer:

❑

Wireless Keypad #1 emergency keys enabled

❑

Wireless Keypad #2 emergency keys enabled

❑

Wireless Keypad #3 emergency keys enabled

❑

Wireless Keypad #4 emergency keys enabled

Wireless Keypad Arming to Stay Mode

To arm the system to Stay Mode using a wireless keypad, enter a User Code and press the

•

STAY

button. (If Quick Arming has been allowed by the installer, just press the

STAY

button.)

✓

NOTE:

If there are open doors or windows, the system will not allow arming to Stay Mode

with a wireless keypad. All open sensors must be bypassed at the Control Panel fi rst.

Wireless Keypad Arming to Away Mode

To arm the system to Away Mode using a wireless keypad, enter a User Code and press the

•

AWAY

button. (If Quick Arming has been allowed by the installer, just press the

AWAY

button.)

✓

NOTE:

If there are open doors or windows, the system will not allow arming to Stay Mode

with a wireless keypad. All open sensor-protected doors and windows must either be
closed or bypassed at the Control Panel before arming with a wireless keypad.

Wireless Keypad Disarming

To disarm the system from Stay or Away Mode using a wireless keypad, just enter a User Code.

•

Wireless Keypad Fire Emergency

To trigger a emergency fi re alarm using a wireless keypad, press the

•

FIRE

button for two seconds. (This option must be enabled by the installer.)

Wireless Keypad Police Emergency

To trigger a emergency police (panic) alarm using a wireless keypad, press the

•

POLICE

button for two seconds. (This option must be enabled by the installer.)

Burglary Protection

Содержание Wireless Security System




















































Результаты поиска

Содержание Wireless Security System

Отзывы:

Похожие инструкции для Wireless Security System

Бренды по названию

Популярные бренды

Go!Control Wireless Security System, Инструкция по эксплуатации и руководство пользователя

Результаты поиска

Содержание Wireless Security System

Отзывы:

Похожие инструкции для Wireless Security System

Бренды по названию

Популярные бренды