BB005x Installation and Configuration Guide
Procedure D
- Setting the Network Card in your computer to automatically
obtain an IP address.
1. In the Windows task bar, click on the Start button, highlight Settings
and click on Control Panel.
2. Double click the Network and Dial Up Connections icon
3. In the Network and Dial Up Connections window, right click once on the
Local Area Connections icon and then click on Properties.
4. In the Local Area Connections Properties dialog box, click on Internet
Protocol (TCP/IP) and then click on Properties.
5. In the Internet Protocol (TCP/IP) Properties dialog box, click on the
option
“Obtain an IP address automatically”
(make sure that the black
dot is beside this option).
6. Click on the option
“Obtain DNS server address automatically
” (make
sure that the black dot is beside this option). Do not change any other
settings.
7. Click on the OK button twice to confirm and save your changes and
then, close the Control Panel.
Connection Parameters
The BB005x, like all ADSL access devices, is only one component of the
complex network infrastructure that makes its operation possible. Its
configuration depends on many parameters that are external to the BB005x. In
order to properly configure the BB005x, it is necessary to obtain all of the
required connection parameters and configuration data from the Internet
Service Provider and/or the Network Administrator. The following list contains
various types of information that might be required in configuring the BB005x
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
VPI and VCI values
User Name
Password
Default WAN Gateway
DNS Relay (Enable/Disable)
DNS Server (Primary)
DNS Server (Secondary)
LAN IP address
LAN Subnet Mask
Remote Gateway
NAT enabled or disabled
The PPP Authorization type
The Framing Mode
WAN IP
WAN Subnet Mask
11
