GNATUS In Cam LX Camera, Инструкция по эксплуатации

Страница: 17 / 44

17
INSTALLATION
Installation of the camera in the “Computer”
In order to install the camera in the computer, connect the power supply source of
the camera (01) to the electrical network and the other end to the module (02). Connect
the USB cable (03) to the back of the module and the other end to the USB input of the
computer (4) and turns on the module.
1
2
3
4
We recommend that you use the “2.0” USB device input located in
the back of the computer.
Fixation of the camera holder in the ruler of the holder monitor.
To install the holder of the camera (A) in the ruler of the holder monitor (B), use a
Phillips screwdriver and release the 2 screws (C) that match the piece (A) and (D). Discard
pieces (C) and (D), because they will no longer be used, attach the piece (A) in the ruler
(B) using the 2 screws (E). Remembering that it is extremely important the utilization of
the magnet, because it has the automatic disconnection function of the camera.
This procedure must be applied in case of purchasing the “Holder Monitor set”.