Connecting during a follow-up
When returning for a follow-up visit, the software will open to the last saved session.
Depending on the saved preferences, the session will open to either the Patient Profile
screen or the Fitting screen.
1. Insert the battery and close the battery door of each hearing instrument to be
programmed.
2. Select the desired interface and click ‘Connect’ in the collapsible side bar panel.
3. The hearing instruments will appear in the ‘Select Instruments’ section. When the
hearing instrument to be programmed has been identified, select it by checking the
left box.
4. The hearing instrument that has already been programmed for this patient will
already be assigned to the right or left side. When the other instrument is selected,
it will automatically be assigned to the opposite side. It is recommended to beep the
instrument for confirmation that the instrument selected in the software is in fact the
instrument being used in the fitting and on the correct side.
5. Continue in the lower right of the screen once the instruments are selected and
assigned.
6. Continue to the connection flow and follow steps in the ‘First Fitting’ section of this
guide.
Replacing one hearing instruments of a pair
