6. Commissioning
The tester is equipped with modern touch-screen technology. That means
that the LC display and the control buttons are in one control screen. The
control buttons are always edged.
After activating the mains switch a self-test is carried out. If everything is in
order, the following display appears on the touch-screen as a switch-on
message (Fig. 3):
Continue with large button (Fig. 3).
A display for entering the date appears (Fig. 3a).
6.1 Basic settings of the tester
Press the [Configuration] button in the Main menue (Fig. 4).
The Configuration menue appears (Fig. 5):
Fig. 5
Type designation
Relevant standard
Firmware version
Manufacturer
Large button
Headline
Function buttons:
Tests according to standard
Testing of individual parameters
Basic settings of the tester
Fig. 3
Fig. 4
Function buttons
Symbol for the internal memory
or the MMC memory card
Headline
9
Measuring method for protective
conductor or touch current:
DIR. - direct Measurement
(test object insulated from earth)
DIF. - differential current method
(Test object not insulated from
earth)
Operating manual for the TG uni 1 appliance Tester
Commissioning
As the tester does not have its own real-time clock, you are prompted to
confirm the displayed date or enter a new date.
Also see Point 6.4.
After confirmation with the [OK] button the Main menue appears (Fig. 4):
Fig. 3a
☞
