MINIBRUTE SIDE PANEL INSTALLATION
10/20/2016 – Rev 2.1
www.GMUSynth.com
Page 3 of 3
17)
Re-insert the keybed rest in between the side panels. You
may have to apply pressure outwards, slightly spreading the
panels apart in order to have enough clearance to insert the
keybed rest.
18)
Using the factory screws you removed and saved in step 1,
re-insert and tighten the 8 screws circled below:
19)
Using the black wood screws included with your new side
panels, insert and tighten the 8 screws circled below. Do not
over tighten. Note the pilot holes in the side panels may
not align perfectly to the bottom panel holes. Do not worry,
the screws will eventually seat into the pilot holes as they
are tightened.
20)
Enjoy your newly dressed MB!
