GMS MagicWindow DT-15NT, Руководство пользователя

Страница: 6 / 17

MONITOR DRIVER INSTALLATION
First, turn the computer and the monitor on and insert the installation disk into the floppy disk drive.
Click "Control panel" and then follow the steps given below.
1 Choose a model and click "OK"
4 If the screen performs normally after appearing
the monitor optimization mode, click "Yes"
Otherwise, click "No"
2 Click "OK"
3 Click "OK"
5 Adjust the resolution and vertical frequency and then click "OK"
6 Click "OK"
7 Click "Yes"
Manual Installation
If you do not want the monitor optimization function, click "Cancel"
This screen shot is for the mode reset.
Or click the right button on the mouse and then click "Properties"
If you want to change the resolution, click "No".
Repeat the above steps and set the optimal resolution.
First, turn the computer and the monitor on and insert the installation disk into the floppy disk drive.
Double click on "install.exe" and follow the steps below.
If you install the monitor driver, the resolution and frequency are suitable for the monitor and you can
experience the clear screen.
INSTALLATION
www.gmstechnology .co.kr 6 page
INSTALLATION
www.gmstechnology .co.kr 7 page
Auto Installation
If the installation does not work automatically, install the driver manually
1 Click "Control panel" 2 Click "Display"