8
Water Resistance
The Jacquard Tag is resistant to rain and splashing and can be used
outdoors, but it is not fully waterproof. Do not submerge the Jacquard
Tag and do not use the Jacquard Tag inside a very wet shoe. Allow the
Jacquard Tag, insole, or other Jacquard compatible device to dry and
resume using. Do not wash the Jacquard Tag as doing so may damage
the Tag. The Jacquard Tag has a water protection rating of IP54 under
IEC 60529. If your Jacquard Tag is damaged, water resistance may be
compromised.
Storage
Fully charge the Jacquard Tag and store disconnected from the insole
or other Jacquard compatible device and your phone when not in use to
maximize battery life.
Service, Repair & Support
Contact customer service and do not use the Jacquard Tag if it is not
working properly or has been damaged.
Unauthorized repairs or modifications could result in permanent damage
to your Jacquard tag or the insole and may affect your warranty coverage
and regulatory authorizations. Contact customer service for authorized
service.
Please check the FAQ online, in the Help section. If you can’t find an
answer to your question there, please contact the customer service team.
Contact information is available online at: www. adidas.com/GMR
Care and Cleaning for GMR insole
Your GMR insole consists of a high-performance EVA compound. Never-
theless, treat it with care and make sure you air dry it once it has got wet.
Always handle the shoes with care when the device is integrated. (i.e. do
not hit the shoe against walls or sharp edges.)
Remove the Jacquard Tag before washing and cleaning the insole or the
shoes. Do not wash or dry the Jacquard Tag. To clean the Jacquard Tag,
wipe it with a soft dry or damp cloth. Do not use soaps, solvents or abra-
sives on the Jacquard Tag.
Insole care instructions
Do’s
• Wash in cold water and air dry.
Dont’s:
• Do not expose the insole to direct sunlight or a near heat source like
an oven or a radiator after washing.
• Do not use solvent-based care products such as leather creams as
they will damage the surface.
The adidas GMR boot insole is developed to fit in all kinds of football
boots (Soft Ground, Firm Ground, Hard Ground, Artificial Turf, Multi
Ground, Turf and Indoor) and does not refer to adidas boots only. Never-
theless, make sure that the insole fits in the shoe properly as otherwise
your product could be damaged.
Содержание G022A
Страница 1: ...1 USER GUIDE GUIDE UTILISATEUR ...
Страница 140: ...140 ...