GMP PROTOPIC-540 QUATRO SLIT, Руководство пользователя

Страница: 25 / 51

MAIN DEVICES
☞ Side Slitter & Rewinder
To slit film ends if a film roll width is wider than substrate.
Put the side slitters at a proper position to slit film.
Rewind the slitted films on Rewinder.
WARNING :
Be careful to use this because sharp blade could be a cause of injury.
☞ Perforator
To cut a laminated results easily, perforator makes holes on film ends.
Position the device from the film ends by 1~3mm inside.
To make clear holes on films with adjust perforator height adjustment bolt.
WARNING :
In the initial loading status, if the perforator is needed to be moved, loosen the perforator height adjustment bolt.
Otherwise, blade or roller could be damaged.
To help cut the laminated results and this is used to avoid "torn film" for cutting process.
As the right picture, make the laminated results have curved line to have quality results.
WARNING :
If skewing wheel is not adjusted properly, laminated result could be folded.
CUTTING DEVICES
Perforator Pressure Adjustment Bolt
SIDE SLITTER
REWINDER
ON
OFF
25/51