Page 14 of 16
General Machine Products Co., Inc.
1a.
General Machine Products Co., Inc. ("GMP") warrants to the purchaser and/or end user:
(1) that a new product sold and manufactured by GMP will be free from original defects in material and
workmanship for one year from the date the product was delivered to the purchaser and/or end user,
or for the lifetime of the Modular Plug Presser;
(2) that a new product sold and not manufactured by GMP will be covered exclusively by the manufac-
turer's warranty. However, if that warranty coverage shall provide less coverage than the GMP War-
ranty for its manufactured products, then the warranty set forth in Paragraph 1(a)(1) above shall apply
instead;
(3) that a reconditioned used GMP product sold by GMP, or a non-owned product repaired by GMP,
or a new part sold by GMP, will be free from original defects in material and workmanship for ninety
days from the date the product was delivered to the purchaser and/or end user.
1b.
The above warranties are contingent upon and subject to the condition that: (1) the end user sub-
stantiates the date it purchased and received delivery of the product or part, and (2) the product or
part shall have been installed, maintained and used in accordance with GMP's or the manufacturer's
written instructions.
2.
The end user shall determine the suitability of GMP's product or part for intended use, and the end
user assumes all risk and liability whatsoever in connection therewith except to the extent set forth in
this Limited Warranty.
3a.
GMP reserves the right to request that the product or part be returned to us for examination and
cannot be responsible for user charges incurred in the replacement of any product. GMP's agreement
to repair or replace is also subject to its inspection of the product and verification of the defect.
3b.
Subject to immediate written notification of a defect or malfunction, GMP will repair or replace that
product or part, at GMP's option, returned freight prepaid to Trevose, PA.
3c.
To obtain repair or replacement service under the Limited Warranty, the purchaser must contact
the factory for a Return Material Authorization (RMA). Once obtained, send the RMA along with the
defective part or product, transportation prepaid to:
3d.
The field labor and material charges incurred by an authorized GMP dealer or an end user to dis-
assemble, inspect, repair and reassemble our product or part at their respective prime locations will
not be reimbursed unless GMP has first reviewed and approved those charges.
3e.
Incidental repair charges incurred by an authorized dealer or an end user for items such as labor,
transportation, tolls, lodging and meals at a location remote from its prime facility, or to demount our
product or part from its remote location and forward to its prime facility, are not the responsibility of
GMP, and are not covered by this Warranty.
3f.
Incidental repair charges incurred by an authorized GMP dealer or end user to remove construc-
tion hardware, modify a vehicle or otherwise gain access to GMP's product or part, is a condition be-
yond GMP's control, and is not covered by this Warranty.
GMP Limited Warranty
General Machine Products Co., Inc.
3111 Old Lincoln Highway
Trevose, PA 19053-4996 USA
Tel: 215.357.5500
Fax: 215.357.6216
