GMI MEGA DETECTION GOLDSTAR 3D SCANNER, Руководство пользователя

Страница: 23 / 42

On this screen, the user can specify the direc-
tion of the scanning path, which includes two
options:
1 - One Direction: the ground scan is performed
for each line with the same direction, i.e. the
direction of the scan is according to parallel
lines and a distance between them
2 - Zigzag: In this case, the start of the next
scan line is at the end of the previous scan line
(while leaving an offset distance), meaning that
every two successive lines are scanned in an
opposite direction.
Select your preferred scan path mode using the
Left / Right arrow keys, then press the OK key
The user can choose the dimensions of the
scanning area using this screen, which are:
Width (Lines)
It is the number of scan lines and can be set
using the Up / Down arrows, then press the OK
key
Height (Steps)
This number expresses the number of scanning
steps or points for each line, and it can be
changed by using the Up / Down arrows and
then pressing the OK key
GROUND SCAN
AUTOMATIC MODE
Path
Size
Line 4 Line 3 Line 2 Line 1
Step 1
Step 2
Step 3
Step 4
22
To understand the difference between lines and steps, look at the following figure:
When the user stands straight in the search area, every step he takes forward is called a scan point
or step, and every time the user moves to the left or right, it is called scan line, meaning he moves
to a new scan line.
In this case, the device will automatically scan the points without user intervention, as it scans the
points automatically with an interval between each point. User only has to press on start button at
start of next scan line.
To choose the appropriate scan mode, use the Left / Right arrow keys, then press the OK key