GMG 1530-ED, Руководство по эксплуатации и ремонту

Страница: 18 / 68

1-2
January 26, 2019
“1530-ED” Parts and Service Manual
MACHINE MAINTENANCE - GENERAL
MACHINE MAINTENANCE - GENERAL
Instructions in this portion of the manual are to be used in conjunction with the Pre-Start, Frequent and
Annual Inspection checklists found in this machine’s Operator’s Manual.
IMPORTANT:Scheduled maintenance inspection checklists are included in the Operator’s Manual for
use only by qualified service technicians. Only qualified service technicians may perform repairs to
the machine. After repairs are completed, the operator must perform a Pre-Start Inspection before
proceeding to the Functions Test.
HYDRAULIC FLUID UNDER PRESSURE CAN PENETRATE AND BURN SKIN, DAMAGE EYES, AND MAY
CAUSE SERIOUS INJURY, BLINDNESS, AND DEATH. REPAIR LEAKS IMMEDIATELY. FLUID LEAKS
UNDER PRESSURE MAY NOT ALWAYS BE VISIBLE. CHECK FOR PIN HOLE LEAKS WITH A PIECE OF
CARDBOARD, NOT YOUR HAND.
NEVER PERFORM WORK OR INSPECTION ON THE MACHINE WITH THE PLATFORM ELEVATED
WITHOUT FIRST BLOCKING THE SCISSOR ASSEMBLY WITH THE MAINTENANCE LOCK (SEE THE
INTRODUCTION PORTION OF THIS MANUAL).
PERFORM SCHEDULED MAINTENANCE AT RECOMMENDED INTERVALS. FAILURE TO PERFORM
SCHEDULED MAINTENANCE AT RECOMMENDED INTERVALS MAY RESULT IN A DEFECTIVE OR
MALFUNCTIONING MACHINE AND MAY RESULT IN INJURY OR DEATH OF THE OPERATOR. KEEP
MAINTENANCE RECORDS CURRENT AND ACCURATE.
IMMEDIATELY REPORT ANY DAMAGE, DEFECT, UNAUTHORIZED MODIFICATION OR MALFUNCTION
TO YOUR SUPERVISOR. ANY DEFECT MUST BE REPAIRED PRIOR TO CONTINUED USE. DO NOT USE A
DAMAGED, MODIFIED OR MALFUNCTIONING MACHINE.
Never leave hydraulic components or hoses open. Plug all hoses and
fitting immediately after disassembly to protect the system from outside contamination (including
rain).
Never open a hydraulic system when there are contaminants in the air. Always clean the
surrounding area before opening hydraulic systems.
Use only recommended lubricants. Improper lubricants or incompatible lubricants may cause as
much damage as no lubrication.
Watch for makeshift “fixes” which can jeopardize safety as well as lead to more costly repair.
Inspection and maintenance should be performed by qualified personnel familiar with the
equipment.