TX677 Instruction Manual
25
MENU OPTIONS
The
Menu
key is used to adjust the various feature settings. The following table
shows the order of these selections.
No.
Description
Symbol
Options
1
Duplex (channels 1 – 8 and 41 – 48
only)
TX677 Instruction Manual
12 June 2018
© 2018 Standard Communications Pty Ltd trading as GME. All rights reserved.
23
50157
Content
Silent mode cannot be activated unless a CTCSS or DCS code has been selected via the
Menu
key (See Menu options for more details). If CTCSS/DCS tones are set to ‘Off’, any attempt to
activate the Silent mode will be ignored. When communicating with other radios using CTCSS
or DCS, all radios must be switched to the same channel and have the same CTCS or DCS code
selected. To receive signals from radios that are not using CTCSS or DCS, you will need to disable
Silent mode on that channel.
Menu Options
The
Menu key is used to adjust the various feature settings. The following table shows the order of
these selections.
No.
Description
Symbol
Options
1
Duplex (channels 1 – 8 and 41 – 48 only)
on/oF
2
CTCSS and DCS code selection
ct/dt
oF/01 – 50/
001 – 104
3
Transmitter power
Po
Hi/Lo
4
VOX settings
Uo
oF/1 – 3
5
Squelch level setting
Sq
Aut/1 – 5
6
Roger Beep setting
rb
oF/on
7
Button Beep selection
bP
oF/on
8
Call Alarm selection
CL
oF/1 – 5
9
Dual Watch channel
dU
oF/on 1 – 80
The duplex menu option will only appear when channels 1-8 or 41-48 are selected. CTCSS/DCS
and transmit power settings are inhibited on channels 5/35 (emergency channel).
Using the Menu
•
To access the menu, press and hold the
Menu key until the radio beeps. Menu options
will appear in the order listed above.
•
To step to the next menu item, press the
Menu key again.
•
To change options in selected menu, press the
or
keys.
•
To store your selection and exit menu, press the
PTT
switch.
on/oF
2
CTCSS and DCS code selection
ct/dt
oF/01 – 50/ 001
– 104
3
Transmitter power
Po
Hi/Lo
4
VOX settings
Uo
oF/1 – 3
5
Squelch level setting
Sq
Aut/1 – 5
6
Roger Beep setting
rb
oF/on
7
Button Beep selection
bP
oF/on
8
Call Alarm selection
CL
oF/1 – 5
9
Dual Watch channel
dU
oF/on 1 – 80
Note:
The duplex menu option will only appear when channels 1-8 or 41-48 are
selected. CTCSS/DCS and transmit power settings are inhibited on channels 5/35
(emergency channel).
USING THE MENU
• To access the menu, press and hold the Menu key until the radio beeps.
Menu options will appear in the order listed above.
• To step to the next menu item, press the Menu key again.
• To change options in selected menu, press the
or
keys.
• To store your selection and exit menu, press the
PTT
switch.
