background image

t X 6 7 5  

i n s t r u c t i o n   m A n uA l  

PA G E     9

charging the tX675 single unit

the tX675 is supplied with a 240V Ac adaptor and a usB lead. the Ac adaptor will 
charge a fully discharged 1600 mAh battery pack to full capacity in around 4 hours.

to charge the radio

1.  Plug the Ac adaptor into a 240V Ac outlet

2.   Plug the usB lead into the usB socket on the Ac adaptor and the micro usB 

connector into the charging socket on the side of the radio.

the radio will begin charging. During this time the radio’s indicator lED will light rED 
and the battery icon on the display will animate. once the battery is fully charged,  
the indicator lED will change to GrEEn and the battery icon will show the fully  
charge state.

in-Vehicle charging

A 12V vehicle charger is available as an optional accessory. this will also charge your 
tX675’s battery to full capacity in around 4 hours using 12V Dc from your vehicle’s 
accessory socket.

charging the tX675 tWin PacK

the tX675 twin Pack is supplied with a dual desktop charger, 240V Ac adaptor,  
12V vehicle charger and a usB lead. 

using the Ac adaptor, the dual desktop charger will charge two fully discharged  
1600 mAh battery packs to full capacity in around 4 hours. 

if using the 12V vehicle charger with the dual desktop charger, two fully  
discharged 1600 mAh battery packs can be charged to full capacity in around  
8* hours (with radios switched off).

Both the Ac charger and 12V vehicle charger can also be used to directly charge a 
single tX675 radio in around 4 hours.

* note: 

when using the 12V vehicle charger 

to charge two radios via the dual desktop 
charger, we recommend switching both 
radios off while charging to ensure the 
batteries reach their full charge in the 
allotted 8 hour period. if one or more radios 
remain switched on during the charging cycle 
the batteries will achieve close to their full 
charge in the allotted time but the indicator 
lED may not switch to GrEEn. this is due to 
the lower charge current available from the 
12V vehicle charger.

   Desktop  charger

   tX675

  indicator lED

   rear  cradle

   usB lead from  

Ac or 12V 
adaptor

   Front  cradle

Содержание TX675

























Отзывы: