t X 6 7 5
i n s t r u c t i o n m A n uA l
PA G E 1 7
VoX settings
the VoX feature allows you to have hands-free conversations. when you speak, the
microphone automatically detects your voice (or other nearby sound) causing the
radio to transmit without the need to press the
Ptt
.
to enable VoX operation
1. Press and hold the
menu
key until the radio beeps.
2. Briefly press the
menu
key repeatedly until ‘Vo’ is displayed.
3. Press the or keys to set the VoX sensitivity from 1 (min) to 3 (max). A
minimum setting requires a louder voice to activate the VoX while a maximum
setting will activate the VoX with a much softer voice.
4. to disable the VoX completely, set the VoX sensitivity to ‘oF’.
5. Press the
Ptt
key to confirm and store your selection.
when VoX is enabled, the icon is visible on the display.
note:
using the radio in a noisy environment with the VoX sensitivity set to
maximum could cause the radio to transmit unexpectedly. if this happens simply
reduce the sensitivity setting.
squelch leVel setting
the squelch is designed to keep the radio quiet when there are no signals present.
the squelch setting adjusts the sensitivity of the squelch to incoming signals. Higher
squelch settings require stronger signals to overcome the squelch and be heard in the
speaker while lower settings allow much weaker signals to be heard.
to set the squelch
1. Press and hold the
menu
key until the radio beeps.
2. Press the
menu
key repeatedly until ‘sq’ is displayed. the current squelch level
will flash.
3. Press the or keys to adjust the squelch level from 1 (most sensitive) to 5
(least sensitive) or select Aut (Auto) for an automatic setting.
4. Press the
Ptt
to confirm and store your selection.
roger beeP tone
the roger Beep is a tone that is automatically transmitted whenever the
Ptt
is
released. this tone serves to alert the receiving party that your transmission
has ended.
to enable or Disable the roger beep tone
1. Press and hold the
menu
key until the radio beeps.
2. Press the
menu
key repeatedly ‘rb’ is displayed. the
icon will be flashing.
3. Press the or keys to select ‘on’ or ‘oF’.
4. Press the
Ptt
to confirm and store your selection.
