GME TX665, Инструкция по эксплуатации

Страница: 9 / 25

T X 6 6 5 I N S T R U C T I O N M A N UA L PA G E 9
IN-VEHICLE CHARGING
A 12V vehicle charger (BCV010) is available as an accessory. This will charge a single
fully discharged TX665 battery pack to full capacity in around 4 hours using 12V DC
from your vehicle’s accessory socket.
When connecting the 12V vehicle charger to the twin desktop charger, two fully
discharged TX665 battery packs can be charged to full capacity in around 6* hours
(with radios switched off).
* NOTE:
When using the 12V vehicle charger to charge two radios via the twin
desktop charger, we recommend switching both radios off while charging to ensure
the batteries reach their full charge in the allotted period. If one or more radios
remain switched on during the charging cycle the batteries will achieve close to their
full charge in the allotted time but the indicator LED may not switch to GREEN.
This is due to the lower charge current available from the 12V vehicle charger.
TO REMOVE THE BELT CLIP
1. Hold the radio with the belt clip facing towards you.
2. Push the release clip downwards to release the locking mechanism while sliding
the belt clip upwards.
3. The belt clip will slide off the radio.
TO FIT THE BELT CLIP
Slide the belt clip into the catch grooves at the top of the belt clip holder and slide
down all the way until it ‘clicks’.
REPLACING THE BATTERY PACK
TIP:
Removing the belt clip first will provide easier access to the battery cover
1. Ensure the radio is switched off.
2. Hold the radio face down in your hand with the battery cover facing upwards.
Slide belt clip
this way until
it ‘clicks'
Push latch
towards base
to unclip Slide belt clip
towards top
to release
USB lead from AC
adaptor (PS003)
or 12V adaptor
(BCV010)