GMC Yukon/Yukon XL/Denali Owner Manual (GMNA-Localizing-U.S./
Canada/Mexico-11349262) - 2018 - crc - 6/20/17
32
Keys, Doors, and Windows
/
:
Press and release
Q
, then
immediately press and hold
/
until
the turn signal lamps flash or for at
least four seconds. The engine may
be started from outside the vehicle
using the RKE transmitter. See
Q
:
Press to lock all doors.
If enabled, the turn signal lamps
flash once to indicate locking has
occurred. If enabled, the horn chirps
when
Q
is pressed again within
three seconds. See
.
Pressing
Q
arms the alarm system.
See
If equipped with auto mirror folding,
pressing and holding
Q
for
one second will fold the mirrors,
if enabled. See
.
K
:
Press once to unlock only the
driver door. If
K
is pressed again
within three seconds, all remaining
doors unlock. The interior lamps
may come on and stay on for
20 seconds or until the ignition is
turned on.
If enabled, the turn signal lamps
flash twice to indicate unlocking has
occurred. If enabled, the exterior
lamps may turn on. See
Pressing
K
on the RKE transmitter
disarms the alarm system. See
.
If equipped with auto mirror folding,
pressing and holding
K
for
one second will unfold the mirrors,
if enabled. See
Press and hold
K
until the windows
fully open, if enabled. See
b
:
Press twice to open or close
the liftgate. Press once to stop the
liftgate from moving.
c
:
Press twice to open the
liftglass.
7
:
Press and release to initiate the
vehicle locator. The turn signal
lamps flash and the horn sounds
three times.
Press and hold
7
for more than
three seconds to activate the panic
alarm. The turn signal lamps flash
and the horn sounds repeatedly for
30 seconds. The alarm turns off
when the ignition is turned on or
7
is pressed again. The ignition must
be off for the panic alarm to work.
Programming Transmitters to
the Vehicle
Only RKE transmitters programmed
to this vehicle will work. If a
transmitter is lost or stolen, a
replacement can be purchased and
programmed through your dealer.
Each vehicle can have up to
eight transmitters programmed to it.
See your dealer for transmitter
programming.