manualshive.com logo in svg

GMC Tech 2, Руководство пользователя

Поделиться
Скачать
GMC Tech 2 Скачать руководство пользователя страница 62

SECTION VIIA

TECH 2 MAIN MENU & LIVE PLOT

2005     Tech 2 User’s Guide     VII - 12

SCREEN DISPLAY SAMPLES:

1. Select F0: Diagnostics from the Tech 2 Main Menu (

Figure VIIA-1

), “build” the vehicle, and select a

system—powertrain, body, or chassis (refer to page VII-3).

2. From Data Display, select the More soft key twice to bring

up the Live Plot soft key.

3. Once up to three parameters are selected, select Accept to

see a graph of the data.

4. All of the features on the resulting graph are available while

Live Plot is functioning. Pressing the More soft key leads to
options that allow the user to zoom in and out on the plotted
graph 50 frames at a time and change the min/max values of
a highlighted data parameter.

Live Plot

Live Plot is a Tech 2 feature that allows data display parameters to be graphed in real time as it happens.
The Live Plot function will allow up to three parameters to be plotted on a graph at one time. The data of
these parameters will be plotted as the information is received on the Tech 2 from the vehicle. This may
aid in the diagnosis of an intermittent vehicle condition by enabling the user to view data from the vehicle
graphically. Any spikes or drops on the graph can be analyzed immediately. Previously, data had to be
captured before it could be plotted. The Live Plot application is available from the Data Display, Quick
Snapshot, and Snapshot applications on the Tech 2.

Figure VIIA-18
“Live Plot” soft key on data screen

Figure VIIA-19
“Accept” soft key on data screen

Figure VIIA-20
Live Plot screen soft key options

Live Plot example continued on next page...

RETURN TO MAIN MENU

Содержание Tech 2














































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды