manualshive.com logo in svg

GMC Tech 2, Руководство пользователя

Поделиться
Скачать
GMC Tech 2 Скачать руководство пользователя страница 6

2005     Tech 2 User’s Guide     v

Software License Agreement

Please read this license agreement carefully before proceeding to operate the equipment. Rights to the
software are offered only on the condition that the customer agrees to all terms and conditions of the
license agreement. Proceeding to operate the equipment indicates your acceptance of these terms and
conditions:

1. USE: Customer may use the software only on the computer system on which it was originally installed. Customer may not reverse

assemble or decompile software unless authorized by law.

2. OWNERSHIP: Customer agrees that it does not have any title or ownership of the software, other than ownership of the physical

media. Customer acknowledges and agrees that the software is copyrighted and protected under the copyright laws. Customer
acknowledges and agrees that the software may have been developed by a third party software supplier named in the copyright
notices included with the software, who shall be authorized to hold the Customer responsible for any copyright infringement or
violation of this agreement.

3. TERMINATION: General Motors may terminate this software license for failure to comply with any of these terms provided GM has

requested Customer to cure the failure and Customer has failed to do so within thirty (30) days of such notice.

Limited Warranty

SOFTWARE: Vetronix warrants for a period of ninety (90) days from the date of purchase that the Vetronix software product
will execute its programming instructions when properly installed. Vetronix does not warrant that the operations of the
Vetronix software will be uninterrupted or error free. In the event that this Vetronix software product fails to execute its
programming instructions during the warranty period, the remedy shall be a replacement of such software product.

LIMITATION OF WARRANTY: Vetronix makes no other express warranty, whether written or oral with respect to this product.
Any implied warranty of merchantability or fitness for or a particular purpose is limited to the 90-day duration of this written
warranty. Some states or provinces do not allow limitations on how long an implied warranty lasts, so the above limitations or
exclusion may not apply to you.

EXCLUSIVE REMEDIES: The remedies provided above are Customer’s sole and exclusive remedies. In no event shall
Vetronix be liable for any direct, indirect, special, incidental or consequential damages (including lost profit) whether based
on warranty, contract, tort or any other legal theory.

www.autocardiag.com

RETURN TO MAIN MENU

Содержание Tech 2














































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды