6-46
Roof Marker Lamps
1. Remove the screws and lift off the lens.
2. Pull the bulb straight out of the socket.
3. Put a new bulb into the socket and push it in
until it is tight.
4. Reinstall the lens and tighten the screws.
Pickup Box Identification Lamps
(Dual Rear Wheel Pickup Models)
1. Remove the screws and lamp assembly.
2. Unplug the lamp assembly harness.
3. Use a screwdriver to gently pry the individual lamp
from the lamp housing.
4. Unplug the lamp at the connector.
5. Plug in a new lamp and snap it into the housing.
6. Reinstall the lamp housing.
Taillamps (Pickup Models)
1. Open the tailgate.
2. Remove the two rear
lamp assembly screws
near the tailgate latch
and pull out the
lamp assembly.
3. Remove the screws
from the bulb retainer
and take it off the
lamp assembly.
Содержание Sierra 2000
Страница 1: ......
Страница 130: ...2 62 Instrument Panel Your Information System...
Страница 272: ...5 38 NOTES...
Страница 413: ...7 64 Maintenance Record DATE ODOMETER READING SERVICED BY MAINTENANCE PERFORMED...