background image

4

Safety rules for petrol blowers

Training

  

Read the instructions carefully.

 Get familiar with the 

controls and proper use of the equipment.

  

Only use the blower for the purpose for which it was 

designed, i.e. blowing garden debris.

 Any other use 

can be hazardous, causing damage to the machine.

  

Never allow children or people unfamiliar with these 

instructions to use the blower.

 Local regulations may 

restrict the age of the operator.

  

Never use the blower:

  – When people, especially children, or pets are nearby.
  –  If the operator has taken medicine or substances that 

can affect his ability to react and concentrate.

  

Remember that the operator or user is responsible  

for accidents or hazards occurring to other people or  

their property.

  

Do not use unit around people with long hair.

  

Dress appropriately do not operate with loose  

clothing ensure there is a gap between the air  

intake and the operator. 

Preparation

  

While blowing, always wear sturdy footwear and long 

trousers.

 Do not operate the equipment with bare feet  

or open sandals.

  

WARNING: DANGER!

 Engine fuel is highly flammable:

  –  Store fuel in containers specifically designed for  

this purpose.

  –  Refuel using a funnel and outdoors only. Do not smoke 

while re-fuelling or whenever handling the fuel.

  –  Add fuel before starting the engine. Never remove 

the cap of the fuel tank or add fuel while the engine is 

running or when the engine is hot.

  –  If fuel is spilled, do not attempt to start the engine but 

move the machine away from the area of spillage and 

avoid creating any source of ignition until the fuel has 

evaporated and the vapour dispersed.

  – Replace all fuel tanks and containers caps securely.

  

Substitute faulty silencers.

  

Before use, always inspect the machine and check 

that the screws are not worn or damaged.

  

It is advisable to wear suitable eye protection when 

operating the blower.

Maintenance and storage

  

Keep all nuts, bolts and screws tight to be sure the 

equipment is in safe working condition.

 Regular 

maintenance is essential for safety and performance.

  

Never store the equipment with fuel in the tank inside 

a building where vapour may reach a flame or a 

spark or a source of extreme heat.

  

Allow the engine to cool before storing in an  

enclosed space.

  

To reduce the fire hazard, keep the engine, exhaust 

silencer, battery compartment (if applicable) and fuel 

storage area free of grass, leaves, or excessive grease.

  

If the fuel tank has to be drained, this should be done 

outdoors and when the engine is cool.

  

For reasons of safety, do not use the equipment with 

worn or damaged parts.

 Parts are to be replaced and 

not repaired. Parts that are not of the same quality can 

damage the equipment and be dangerous for your safety.

  

Fuel goes off fairly quickly.

 If you find your blower 

does not start, 1st change the fuel in the tank with newly 

purchased fuel.

Service

  

Have your power tool serviced by a qualified repair 

personnel using only identical replacement parts.

 This 

will ensure that the safety of the power tool is maintained.

Operation safety instructions
WARNING.

 Stop the engine and unplug the spark plug 

before any repairs or maintenance operations.

  

Check that all nuts, bolts and screws are well 

tightened before every use.

Содержание PB26CC

















Отзывы: