
Page | 14 For enquiries or support : visit www.gmcaircon.co.za or contact us on +27 12 661 1173
DRAINAGE
EMPTYING THE WATER TANK
When the tank is full, the unit will make a buzzing sound, and the “Water Full” light will
turn on.
Press the POWER button to turn off the unit.
Pull on the water tank and simply slide it out of the body of the dehumidifier.
Empty the water into an area with a drain or an outside drainage area.
Clean the inside of the tank as well as the outside.
Replace the empty tank back into the unit.
Press the POWER button to resume operating.
If the Water Full light does not extinguish, check that the float is correctly in place.
Warning
1. Do not discard water tank magnets and plastic rivets. Otherwise, the machine will not
automatically stop working when the water tank is full, and the condensed water will
overflow and damage the floor of the room.
2. Please be sure to clean the condensed water in the water tank before resetting the
working mode of the machine.