Page | 11 For enquiries or support : visit www.gmcaircon.co.za or contact us on +27 12 661 1173
Auto mode - continuously drying mode-sleeping mode cycle, press once to switch the mode
from one to another, the corresponding indicator lights up.
●
Auto mode
: when environmental humidity ≥ set hu3%, the fan starts
working and compressor starts working after 3 seconds.
When environmental humidity ≤ set humidity -3%, the compressor stops working
and the fan delay shutdown.
Both fan speed and humidity can be adjusted under auto mode.
●
Continuously drying mode
: The machine continues to run, but the humidity
cannot be adjusted.
●
Sleeping mode
: Touch the sleep button, the button lights up and start the sleep function.
After no operation in 10 seconds, all indicators turn dark gradually and the fan speed is
automatically switched from high to low. Touch any button to activate the indicator. Touch
sleep button again to exit the sleep mode.
In sleep mode, the fault code is not displayed, the fan speed is not adjustable, and the
humidity is adjustable.
Press this key to set the timer function of 0-24 hours.
The interval is 1 hour. Each time you
press this button, the value increased 1 hours and then the corresponding timing value is
displayed on the screen. The setting value is “00” to cancel the timer function. The indicator
turns off.
After the timer is set and completed, the timer LED is on during the timing period. After the
timing is over, the timer LED turns off automatically.