
4.
Tuck and secure any extra wire away from moving parts and test
operation (
See Initial Radio Setup
)
C.
Un-Mounted (Free Standing) Terminal
Use your own USB charging cable included with your Apple, Samsung device
(Port is for charging only)
3.5MM JACK + USB Charing Cable
This option works best for charging and aux input options and can be mounted to
vehicle using included bracket or by drilling hole. Connect USB and 3.5mm to
module (USB and AUX input) and install terminal to dashboard (drilling required)
or bracket (no drilling).
Secure module and proceed to section next section.
Bluetooth Pairing and Connection
This process is required the first time you use the GM3x-HF. After initial pairing,
the GM3x-HF will automatically reconnect with phone upon entering vehicle.
1.
Turn vehicle ignition to “ON”.
2.
Red LED inside module will begin to flash
3.
Access Smartphone Bluetooth menu settings, and search (scan) for
devices.
4.
Select the G2 and click
“Connect”
Note: Supports multiple phones but connects to only one phone at a time.
Caller ID and text display are
not possible in XM mode
.
Operating Bluetooth device is by pressing the control
button and your Voice Recognition application. Use the
factory radio volume button to control playback