
Fig. 11
Module USB port
3.
Install USB head (See
Fig. 12
) in place and flush with mounting surface
(See
Fig. 13
)
Fig. 12
USB head
Fig. 13
Flush mounted to dash
4.
Tuck and secure any extra wire from moving parts and test operation
(See
Enabling the AUX
section below)
B.
USB with Bracket Mount
(No drilling)
1.
Locate a flat surface at location of choice within 6 ft. of radio to mount
USB support bracket (See
Fig. 14
) using the adhesive backing or
screws
Fig. 14
USB mounting bracket
2.
Insert USB male terminal through bracket (See
Fig. 15
) and connect to
Module USB port (See
Fig. 11
)
Fig. 15
3.
Install USB head until it snaps in place and flush (See
Fig. 16
)
Fig. 16