GMC Yukon/Yukon XL/Denali Owner Manual (GMNA-Localizing-U.S./
Canada/Mexico-16417394) - 2023 - CRC - 4/26/22
Seats and Restraints
43
pressing 1 or 2, the two beeps will not
sound indicating memory position were
not saved. Repeat Steps 3 and 4 to try
again.
5. Repeat Steps 1
–
4 for the other remote
key 1 or 2 using the other 1 or 2 memory
button.
It is recommended to save the preferred
driving positions to both 1 and 2 if you are
the only driver.
To save the common exit seating position to
B
that is used by all drivers for Manually
Recalling Seating Positions and Auto Seat
Exit Memory Recall features, repeat
Steps 1
–
4 using
B
, the exit button.
Manually Recalling Seating Positions
Press and hold 1, 2, or
B
button until the
recall is complete, to recall the positions
previously saved to that button.
Manual Memory recall movement for 1, 2 or
B
buttons may be initiated and will
complete to the saved memory position if
the vehicle is in or out of P (Park).
Enabling Automatic Recalls
.
Seat Entry Memory moves the driver seat
to the selected 1 or 2 position when the
vehicle is started. Select Settings >
Vehicle > Seating Position > Seat Entry
Memory > ON or OFF. See
“
Auto Seat
Entry Memory Recall
”
later in this section.
.
Seat Exit Memory moves the driver seat
to the preferred exit position of the
B
button when the vehicle is turned off and
the door is opened. Select Settings >
Vehicle > Seating Position > Seat Exit
Memory > ON or OFF. See
“
Auto Seat Exit
Memory Recall
”
later in this section.
Auto Seat Entry Memory Recall
Seat Entry Memory will automatically begin
movement to the seating positions of the 1
or 2 button corresponding to the driver
’
s
remote key number 1 or 2 detected by the
vehicle when:
.
The vehicle is turned ON.
.
Seating positions have been previously
saved to the same 1 or 2 button. See
“
Saving Seating Positions
”
previously in
this section.
.
Seat Entry Memory is enabled. See
“
Enabling Automatic Recalls
”
previously in
this section.
.
The vehicle is in P (Park).
Seat Entry Memory Recall will continue if
the vehicle is shifted out of P (Park) prior to
reaching the saved memory position.
If the saved memory seat position does not
automatically recall, verify the recall is
enabled. See
“
Enabling Automatic Recalls
”
previously in this section.
If the memory seat recalls to the wrong
position, the driver
’
s remote key number 1
or 2 may not match the memory button
number positions they were saved to. Try
the other remote key or try saving the
positions to the other 1 or 2 memory
button. See
“
Saving Seating Positions
”
previously in this section.
Automatic Seat Entry Memory recalls are
only available for driver
’
s remote key
numbers 1 and 2. Remote keys 3
–
8 will not
provide Seat Entry Memory recalls.
Auto Seat Exit Memory Recall
Seat Exit Memory will begin movement to
the seating position of the
B
button when:
.
The vehicle is turned off and the driver
door is open or opened within a
short time.