GMC 2004 Yokon Denali, Руководство пользователя

Страница: 336 / 480

How to Inspect
Locate the filter change indicator. When the change
indicator turns black or is in the red/orange “change”
zone, replace the filter and reset the indicator. To inspect
the air cleaner/filter, remove the filter from the vehicle and
lightly shake filter to release loose dust and dirt. If the
filter remains “caked” with dirt, a new filter is required.
To inspect and replace the filter and reset the indicator
(if equipped), do the following:
The air cleaner/filter assembly is located on the front
corner of the engine compartment on the passenger’s
side of the vehicle.
1. Loosen the screws on the cover of the housing and
lift up the cover.
2. Remove the air cleaner/filter from the housing.
Care should be taken to dislodge as little dirt
as possible.
3. Clean the filter sealing surface and the housing.
4. Install the new engine air cleaner/filter.
5. Reinstall the cover and tighten the screws.
6. Reset the filter change indicator, if equipped,
by pressing the top button on the indicator.
5-20