Step 4
The seven 8mm diameter holes must be accurately drilled using a high quality accurately made drill. Each
hole should be 60mm deep. Insert the plastic plugs and fix the brackets to the wall. Only use the screws and
plugs provided for all 7 holes.
Important: The holes for the screws should be drilled into the bricks in the wall, not into the mortar
between the bricks.
Step 5
Place the water butt on the brackets making sure the two long protrusions underneath fit snugly on to them
(see pictures below for reference). The steel brackets and long protrusions (labelled 1 & 2) on the bottom of
the water butt lock the water butt flat to the wall. If your water butt does not fit onto the brackets as per
the pictures, you may need to remeasure and fix the brackets either further apart or closer depending on
where they sit.
