Step 2
You will need to mount the water butt on the wall a minimum of 30cm (or higher if using a tall watering can)
from the ground. Height from the ground is dependent on the bucket or can that will be filled. The brackets
are fixed 30 cm apart, measurement is taken from the middle of the holes.
Step 3
Make sure both steel metal brackets are level before fixing, ideally using a spirit level. Brackets must be
fixed properly i.e. facing upwards (see images below) to take the weight of a full water butt and should not
be bent or distorted in any way. Mark the holes with a pen, pencil or the end of a screw. Make sure you fit
the water butt to a flat vertical wall with no unevenness or protrusions. If you have any doubt about the
suitability of the wall where the water butt is to be fixed, please contact us on
provide us with photos of the wall and the location.
Important: You must use only the items we have provided in your delivery (illustrated in our contents
pack in step 1). Failure to comply will result in your warranty becoming invalid. If you wish to discuss
this, please call us on 01462 429 765.
2 x Metal Brackets
