GLW AC 100T, Руководство по эксплуатации

Страница: 7 / 12

AC 100T OPERATION
05/10 5
Commissioning

Check whether finger guard plate (1) is present
and is sitting firm.

Check whether the die set (2) is free from foreign
matter.

Check whether the pneumatic tubing nuts (3)
have been tightened firmly.

Introduce the table clamp into the bore hole in
the tabletop unit and screw tightly to the
worktable.

Check the compressed-air supply:
min. 4 bar, max. 6 bar filtered air.

Connect the free connection (5) on the foot
switch to the compressed-air supply.
Operation

Introduce stripped wire, with wire-end ferrules
already fitted, at the side (1) in the hole
assigned to the cross-section.

Press the switch (2), the crimping process will
be triggered.

Release the switch (3), the crimped wire can be
removed again (4).
Fig. 2 Commissioning
Fig. 3 Operation