background image

22

TESTING WITH BLOOD SAMPLE  

Preparing the Lancing Device for Blood Testing

Please follow the instructions in the lancing device insert for collect-

ing a blood sample.

To reduce the chance of infection: 

 

Never share a lancet of the lancing device. GlucoRx Lancing 

device is for 

self-use only

 

Always use a new, sterile lancet. Lancets are for single use only. 

 

Avoid getting hand lotion, oils, dirt, or debris in or on the lancets 

and the lancing device.

NOTE

Preparing the Puncture Site.

Stimulating blood perfusion by rubbing the puncture site before blood 

extraction has a significant influence on the glucose value obtained.

Blood from a site that has not been rubbed exhibits a measurably 

different glucose concentration than blood from the finger. When the 

puncture site was rubbed prior to blood extraction, the difference was 

significantly reduced. 

* Select the puncture site either at fingertips or another body parts  

   (please see section “Alternative Site Testing” (AST) on how to select 
   the appropriate sites).
* Hand wash the puncture site with warm water and dry thoroughly  
   before testing.
* Rub the puncture site for about 20 seconds before penetration.
* Use a clear cap (included in the kit) while setting up the lancing 
   device.

Please follow the suggestions below before obtaining a drop of 

blood:

Содержание TD-4277









































Отзывы: