background image

22

Caring for Your Meter

Cleaning

● To clean the meter exterior, wipe it with a cloth moistened with tap  

  water or a mild cleaning agent, then dry the device with a soft dry  
  cloth. Do 

NOT

 rinse with water.

● Do 

NOT

 use organic solvents to clean the meter.

Meter Storage

● Storage conditions: -20°C to 60°C (-4°F to 140°F), below 95%    

  relative humidity.

● Always store or transport the meter in its original storage case. 
● Avoid dropping and heavy impact.
● Avoid direct sunlight and high humidity.

Meter Disposal

The used meter should be treated as contaminated that may carry a 
risk of infection during measurement. The batteries in this used meter 
should be removed and the meter should be disposed in accordance 
with local regulations.

The meter falls outside the scope of the European Directive 2002/96/
EC-Directive on waste electrical and electronic equipment (WEEE).

Caring for Your Test Strips

● Storage conditions: 2°C to 3

0

°C (35.6°F to 86°F), below 85%    

  relative humidity. Do 

NOT

 freeze.

● Store your test strips in their original vial only. Do not transfer to

  another container.

● Store test strip packages in a cool dry place. Keep away from

  direct sunlight and heat.

● After removing a test strip from the vial, immediately close the vial

  cap tightly.

● Touch the test strip with clean and dry hands.
● Use each test strip immediately after removing it from the vial.

Содержание TD-4268


































Отзывы: