29
Testing Procedure
STEP 1 Set the Lancing Device.
1. Pull off the cap of the lancing device.
2. Insert a lancet into the lancet holder
secured.
3. Twist the protective disk off the lancet.
4. Replace the cap by aligning the arrow
on the cap with the release button.
5. Select the depth of penetration by
turning the adjustable tip in either direc-
tion so that the arrow on the cap points
to the desired depth.
6. Pull the cocking control back until it
clicks. You will see a color change in-
side the release button when it is ready.
If it does not click, the device may have been cocked
when the lancet was inserted.
The lancing device is now ready for use. Set aside for
later use.
