20
STEP 7 Delete Memory
NOT want to delete memory, press the main button to select “no”
and then press set button to turn off the meter. If you’d like to de-
lete ALL memory, press main button to select “yes”. Then press
set button to delete All memory. ”OK” is displayed in the meter,
which means that all data stored is deleted. The meter will turn
off automatically after the setting.
The time and date can ONLY be changed in the setting mode.
Therefore, when you perform a glucose testing, those parameters
are not possible to be changed.
The meter cannot automatically update daylight saving time. You
have to manually adjust the time in the meter according to the
procedures. Please make sure the meter matches the time zone
and adjust the daylight saving time data if required.
Your meter displays 7-, 14-, 21-, 28-, 60- and 90-day averages
which you can access from the meter memory. These averages
are calculated from results obtained during the 7-, 14-, 21-, 28-,
60- and 90-day preceding the current date and time settings.
When the date and time are changed, the 7-, 14-, 21-, 28-, 60-
and 90-day averages may change.
While the meter is in the setting mode, it will turn off automatically
without any action in three minutes.
PLEASE NOTE!
