W
W
W
W
W
W
C
C
C
&
&
&
C
C
C
C
C
C
W
W
W
GLP
German Light Products GmbH
(Instruction version 1.14) / from software version 1.00/03)
10
2.3.2 DMX
USITT DMX-512 Standard input/output with 3 pole connectors.
3 pole: Pin 1 = [Ground] / Pin 2 = [-] / Pin 3 = [+]
The DMX- Addressing starts at DMX- Address [001].
3 The Menu Field
You’ll find the control board on the side of the arm. It allows you to make
all necessary adjustments of the
I
I
M
M
P
P
R
R
E
E
S
S
S
S
I
I
O
O
N
N
.
. With the Mode-key you
get into the main menu. Afterwards you can navigate through the menu
with the Up/Down-keys. Push the Enter-key to get to the next menu
level or to confirm your settings. Select ON/ OFF function settings with
the Up/Down-keys. Confirm and save with the Enter-key (the display
shows OK). Push the Mode-key to cancel the entry and go back to the
main menu.
Mo d e
Do wn
Ente r
Up
Level1
Level 2
Level 3
Level 4
Remark
DMX Start
Address 001
Define the DMX start address
Special
Manual DMX
Manual control of all system functions
Pan
Manual control for Pan (X-movement)
Speed
Movements
Speed adjustment for Pan/Tilt movements
see
also item below
Pan/Tilt
Movements
Manual control for Pan/Tilt movement
Special
Activate the White- or Full-Power Mode; see also
DMX table
Dimmer
Manual control for dimmer
Shutter
Manual control for shutter
D
O
W
N
-
U
P
1/3 White
Manual control for 1/3 white, 30x LEDs (either warm-
or cold white depending on the system)
2/3 White
Manual control for 2/3 white, 60x LEDs (either warm-
or cold white depending on the system)
Zoom
Manual control for zoom
Tilt
Manual control for tilt (Y-movement)
Display
Contrast
Adjustment for the Display contrast
Default Set
Resetting all functions to original values
Set Dimmer
Frequency
Changes PMW frequency between 600Hz and
1200Hz
LED Dimmer
Version
Reads out the current LED dimmer (software) version
Impression
Version
Reads out the current CPU software version
Adjust
Key code
xxxx
Use the code for entering the calibration menu (for
authorized persons only)
Pan Offset
Calibration for Pan-Offset
Tilt Offset
Calibration for Tilt-Offset
