Glow-worm Ultimate 3, Инструкция по установке и обслуживанию

Страница: 37 / 52

0020239568_03 Ultimate 3 Installation and maintenance instructions
37
C Overview of diagnostics codes
Setting level Values
Unit Increment, select, explanation
Default set-
ting
Own setting
Min. Max.
d.00 Heating maximum output
– –
kW The maximum heating output varies
depending on the product.
→
Section "Technical data"
→
Section
"Technical
data"
Adjustable
d.01 Pump overrun time in
heating mode 1 60 min 1 5 Adjustable
d.02 Burner anti-cycling time
in heating mode 2 60 min 1 20 Adjustable
d.04 Water temperature in the
cylinder Current value
℃ – –
Not
adjustable
d.05 Determined target heating
flow temperature
Current value
℃ – –
Not
adjustable
d.07 Target temperature for
the domestic hot water cylin-
der Current value
℃ – –
Not
adjustable
d.08 Status of the 230 V ther-
mostat Current value
–
0 = Room thermostat open (no heat
requirement)
1 = Room thermostat closed (heat
requirement)
–
Not
adjustable
d.09 Target heating flow tem-
perature that is set on the
eBUS room thermostat Current value
– – –
Not
adjustable
d.10 Status of the internal
pump in the heating circuit Current value
–
off / on
–
Not
adjustable
d.11 Status of the heating cir-
cuit's shunt pump Current value
–
off / on
–
Not
adjustable
d.13 Status of the domestic
hot water circuit's circulation
pump Current value
–
off / on
–
Not
adjustable
d.16 Status of the 24 V room
thermostat Current value
–
off = Heating off
on = Heating on
–
Not
adjustable
d.17 Heating control
– – –
off = Flow temperature
on = Return temperature (adjustment
for underfloor heating. If you have ac-
tivated the return temperature control,
the automatic heating output determ-
ination function is not active.) 0 Adjustable
d.18 Pump overrun operating
mode 1 3
–
1 = Comfort (continuously operating
pump)
3 = Eco (intermittent pump operation
–
for the dissipation of the residual
heat after domestic hot water gen-
eration at an extremely low heat de-
mand)
1 Adjustable
d.20 Maximum target domestic
hot water temperature 50 60
℃
1 50 Adjustable
d.23 Status of the heat de-
mand Current value
–
off = Heating off (Summer mode)
on = Heating on
–
Not
adjustable
d.24 Status of the pressure
switch 0 1
–
off = Not switched
on = Switched
–
Not
adjustable
d.25 Status of the requirement
to reheat the cylinder or for
the domestic hot water warm
start from the eBUS thermo-
stat Current value
–
off = Function deactivated
on = Function activated
–
Not
adjustable