Glow-worm icon 23t, Инструкция для пользователя, по установке и обслуживанию

Страница: 6 / 32

6
icon
User instructions
SAFETY LOCKOUT
If, for any reason, the boiler does not operate, check if lockout lamp (1) is lit. If so, turn
selector (2) to the reset position . The selector is spring loaded and automatically returns to
its’ previous position when released.
Note: This lamp will only light if the boiler has locked out and there is a hot water or central heating
demand at that particular time.
IMPORTANT: If the safety lockout lamp lights frequently, contact your Installer/Service Pro-
vider.
DRAINING AND FILLING
CAUTION: The boiler is installed as part of a sealed system which must only be drained and
filled by a competent person.
Note: If there is persistent loss of system pressure, you must consult your Installer/Service Pro-
vider.
HEATING SAFETY VALVE
CAUTION: A safety valve with a discharge pipe is fitted to this boiler.
The valve MUST NOT BE TOUCHED except by a competent person. If the valve discharges at any
time, switch the boiler off and isolate it from the electrical supply. Contact your Installer/Service
Provider.
SERVICING/MAINTENANCE
To ensure the continued efficient and safe operation of the boiler, it is recommended that it is
checked and serviced at regular intervals. The frequency of servicing will depend upon the instal-
lation conditions and usage but, in general, once a year should be enough.
CLEANING
The boiler casing can be cleaned with a damp cloth followed by a dry cloth to polish.
Do not use abrasive or solvent cleaners.
BOILER CASING
CAUTION: Do not remove or adjust the casing in any way, as incorrect fitting may result in
faulty operation.
If in doubt, contact your Installer/Service Provider.