8
0020003579A
1 General Data
Important Notice
This boiler is for use only on
Natural Gas (G20)
as distributed
in the United Kingdom and Ireland and cannot be used on any
other gas. This boiler must be installed by a
competent person
ONLY
.
Wherever possible, all materials, appliances and components
to be used shall comply with the requirements of applicable
British Standards.
Where no British Standard exists, materials and equipment
should be fit for their purpose and of suitable quality and
workmanship.
Refer to Manual Handling Operations, 1992 regulations.
1.1 Technical Data
Refer to diagrams 1.1, 1.2, and 1.3.
All dimensions are given in millimetres (except as noted).
Approximate weight of complete boiler and packaging:
143kg (315lb)
Water content :
11.7 litre (2.57 gallons)
Gas connection :
Rc
1
/
2
(
1
/
2
in BSPT)
Water connection :
Rc1 (1in BSPT)
Electrical supply :
230V~50Hz, fused 3A
Burner :
Aeromatic
The Seasonal Efficiency Domestic Boilers UK (SEDBUK)
is "D", 100C FF = 78.9% 115C FF = 78.7%.
The value is used in the UK Government’s Standard Assessment
Procedure (SAP) for energy rating of dwellings. The test data
from which it has been calculated have been certified by B.S.I.
1.2 Range Rating
See diagrams 1.2 and 1.3.
GENERAL DIMENSIONS -
given in millimetres
Diagram 1.1
10135
1.3 Statutory Requirements
The appliance is suitable only for installation in GB and IE and
should be installed in accordance with the rules in force.
In GB the installation of the boiler must be carried out by a
competent person
as described in the following regulations:
The manufacturer’s instructions supplied.
The Gas Safety (Installation and Use) Regulations.
The appropriate Buildings Regulations either The Building
Regulations, The Building Regulations (Scotland), The Building
Regulations (Northern Ireland).
The Water Fittings Regulations or Water byelaws in Scotland.
The Health and Safety at Work Act, Control of Substances
Hazardous to Health (COSHH).
The Current I.E.E. Wiring Regulations.
Where no specific instructions are given, reference should be
made to the relevant British Standard Code of Practice.
In IE, the installation must be carried out by a
competent
person
and installed in accordance with the current edition of
I.S.813 "Domestic Gas Installations", the current Building
Regulations and reference should be made to the current ETCI
rules for Electrical Installation.
In GB the following Codes of Practice apply:
BS4814, BS6798, BS5440 Part 1 and 2, BS5546 Part 1,
BS5449, BS6891, BS6700, BS7074 Part 1 and 2, BS7593,
BS7671.
In IE: I.S.813, BS5546, BS 5449, BS 7074, BS 7593.
Manufacturer’s instructions must not be taken as overriding
statutory requirements.
474
3
145
555
442
300
80
32
C
L
WATER CONNECTIONS
Rc1 (1in. B.S.P.T.)
WATER CONNECTIONS
Rc1 reduced with
DISTRIBUTOR TUBE to
Rc
3/
4
(
3/
4
in. B.S.P.T.)
(pumped return)
GAS CONNECTION
Rc
1/
2
(
1/
2
in. B.S.P.T.)
NOTE:
The boiler casing can be set at
two heights, MAX. and MIN.
INSIDE DIAMETER OF
ADAPTER FOR 125mm (5in)
NOMINAL DIAMETER FLUE
TO BS567
*
*
350
MAX
900
MIN
860
558
294