GESBC-3130 User’s Manual
Version 1.0
Page 4 of 18
20-Jun-11
Chapter 1 – Introducing the GESBC-3130 Single Board
Computer
GESBC-3130 Overview
The GESBC-3130 is a low cost compact sized single board computer based on NXP LPC-3130
processor. With a large peripheral set targeted to a variety of applications, the GESBC-3130 is
well suited for industrial controls, digital media servers, audio jukeboxes, thin clients, set-top
boxes, point-of-sale terminals, biometric security systems, and GPS devices.
Advanced Features
The heart of the GESBC-3130 is the LPC-3130 which is the one in a series of ARM926EJ-S-based
processors. The NXP LPC3130 combines an 180 MHz ARM926EJ-S CPU core, high-speed USB
2.0 On-The-Go (OTG), up to 192 KB SRAM, NAND flash controller, flexible external bus
interface, four channel 10-bit ADC, and a myriad of serial and parallel interfaces in a single chip
targeted at consumer, industrial, medical, and communication markets.
The list below summarizes the features of the GESBC-3130.
•
180MHz Processor Core – ARM926EJ-S with MMU
•
32 MB SDRAM
•
128MB NAND FLASH
•
1 10/100 Mbps Ethernet port
•
4 channel 10-bit Analog-to-Digital Converter (ADC
•
RS-232 Universal Asynchronous Receiver / Transmitters (UART)
•
High speed USB OTG Port
•
Real-Time Clock with battery backup
•
Hardware Debug Interface
•
SD/MMC Socket
•
GPIO Ports
•
1 I2C Ports
•
1 SPI Port
Figure 1 below shows a picture of the GESBC-3130 Single Board Computer.
