U
U
s
s
e
e
r
r
m
m
a
a
n
n
u
u
a
a
l
l
12
8.2.
Menu „Installation”
Menu „Installation” includes 3 submenu items:
•
Automatic search cable
•
Manual search cable
•
Default Setting
8.2.1.
Automatic search cable
This function enables quick way to scan
channels. Automatic search cable function
enables to enter scanning parameters:
Start Frequency, End Frequency: Defines start
and end of bandwidth to scan,
Frequency Step: Defines frequency step between next scanned frequencies (0,5 ; 1 ; 7 ; 8 MHz),
Network Search: Uses information optionally provided by the operator, to scan additional frequencies
and channels in the network.
Search Range: Enables to scan only FTA/Free Channels, Scrambled Channels or both.
Logical Channel: Uses information optionally provided by the operator, to sort channels.
After defining all needed parameters, Start Search (Red button) starts scanning of channels.
8.2.2.
Manual search cable
This function enables quick way to scan channels from only one frequency. Manual search cable
function enables to enter scanning parameters:
Frequency, Symbol Rate, Constellation: Defines frequency and other parameters to scan,
Network Search: Uses information optionally provided by the operator, to scan additional frequencies
and channels in the network,
Search Range: Enables to scan only FTA/Free Channels, Scrambled Channels or both,
Logical Channel: Uses information optionally provided by the operator, to sort channels.
After defining all needed parameters, Start Search (Red button) starts scanning of channels.
8.2.3.
Default Setting
In this menu, user can delete channels for TV or radio, and also do factory reset of channels,
configuration and default setting.
