4
1.4 Using the Mini
Before using the Mini for the first time, the unit should be charged for
six hours using the USB cord. This cord can be plugged into any
computer or standard wall socket. While charging, the LED lights will
blink red. When the Mini is fully charged, the LED lights will change to
green.
The center blue button controls many of the Mini’s functions.
Key & Charger
Status
Operation
Mode
LED Indication
Short press
When idle
Green light rotates through all 6 LEDs
When logging
Green light rotates through all 6 LEDs
Sensors currently sampling will show a
light indicator for 3 seconds
Manual logging
Green light continues rotating through all 6
LEDs. Sample is taken by pressing the
center blue key. Sensors recording will
show light indicator for 3 seconds.
Low battery
Red light flashes and rotates through all 6
LEDs
Long press (3 sec)
Entering
Bluetooth pairing
All 6 LEDs flash:
green-red-green
During logging
Stops the logging session and returns to
idle mode
Charging with the
USB cord
Charging
Charging LED flashes red when the battery
is being charged
Once the battery is charged, the charging
LED color changes to green
