Globestock G.Winch, Руководство по обслуживанию

Страница: 9 / 15

9
9.8
Refit the dodecagon washer and standard washer ensuring the
correct position of the washer tongue.
9.9
Refit the spring washer and nut and fasten down tight. (To
achieve this, the handle holder screws can be inserted into the clutch
body and used as leverage, as shown)
10. FIT ROPE KIT
(IF THE ROPE KIT IS NOT BEING
REPLACED, SKIP TO STEP 11)
Feed the rope through the 2 holes in the rope drum and neatly wrap
around the drum towards the locking plate.
Keep the rope tight for 6 rotations when fitting 5 mm rope and 5
rotations when fitting 6 mm rope.
Secure the rope using the plate ensuring the end stop is seated inside
the groove of the rope drum and does not protrude into the path of the
rope.
11. WIND THE ROPE ONTO THE DRUM
Using a 17 mm socket and drill adapter, wind the drum via the nut
in the clutch body. Keep the pawl stop in free spool position to prevent
excessive wear on the tip and neatly lay the rope until fully wound.
Retain the rope in position by clipping the safety hook to the stay bolt.
12. REFIT THE CLUTCH SHIELD PLATE, HANDLE
HOLDER AND WINCH ARM