Globe SP10, Руководство пользователя

Страница: 14 / 20

Page 14
4. Once the “Start” button has been pressed, the mixer timer numbers will begin to descend.
The timer and mixer can be interrupted at any time by pressing the “Stop” button. If the timer cycle is interrupted and
the mixer has not yet finished its set mixing time, the mixing cycle can be continued from where it left off by pressing
the “Start” button.
NOTE: If a cycle is interrupted by the bowl guard being opened or the speed of the mixer being changed, the mixer
will stop. As soon as the fault is corrected, the “Start” button can be pressed to continue the programmed time.
To add additional minutes or seconds to a mix time, “Stop” the mixer, press “TIMER” and adjust the cycle mixing time.
Press the “Start” button to begin mixing once again.
5. At the end of a timed mixing cycle the timer will count down to “00” minutes and “00” seconds, the mixer will stop,
and the timer will return to displaying the last mix cycle time that was entered.
6. To begin another mix cycle with the same set time as the previous mix, press the “Start” button.
If the mix cycle time needs to be adjusted up or down, set the new desired time and then press the “Start” button
to begin mixing.
The mixer timer will always reset back to the last mix time that was set unless the plug or power is disconnected to the
mixer. If power is lost to the mixer, the mixing time will need to be reset to the desired time.
3
Operating Instructions