Page 9
Operating Instructions
Operating Roller Grill
Before operating roller grill, it must be checked to see that it is sitting level. Make sure the roller grill is level, the unit
is clean, and all parts are installed correctly including the catch tray . Please allow 8-10 minutes for warm up time.
Cooks product in 3-10 minutes.
NOTE: Upon first use,
roller grill may emit a burning-metal smell.
This is normal and smell will dissipate with use.
1. The main On/Off switch is located on front panel in line with the control dials.
2. Switch the On/Off switch “ON”.
3. The On/Off switch will activate rollers, but heat will
not
be supplied to the elements.
The heat setting is controlled by dials also located on front panel:
Cooking Selection:
The roller grill has dual controls allowing you to isolate the front and back sections of the unit. Each section
can be adjusted to the following:
OFF:
Heating Elements are “OFF” - 0°F
LOW:
Low Power to heated section selected. Power save when unit is on standby 110°F-125°F
2:
5% power 135°F-155°F
3:
50% power 170°F-210°F
4:
70% power 220°F-260°F
High:
Full power to heating section selected 250°F-350°F
NOTE: The light(s) on the front panel indicate the elements are active. If the indicator light is OFF, the
unit has reached cooking temperature or has been turned off.