
Page 8
NOTE: All programming procedures will use the setup keysheet, which is the one permanently
attached to the scale.
Changing Current Date And Time
IMPORTANT: Before using the scale for the first time, follow these steps to make sure that the current
date and time is correct.
1. Make sure the scale is plugged in, turned on, and there is nothing on the platter.
2. Key in 9000 and press the MODE key. The display will show: P00 REGISTRATION
NOTE: If this does not appear on the display, press the RESET key to clear any data and do the step again.
3. Key in 6 and press the ENTER key. The date will be displayed as month, day and year. If date is correct,
simply press the ENTER key. If not correct, key in the new date and press the ENTER key.
4. The time will be displayed as military time. If the time is correct, simply press the ENTER key. If not correct,
key in the new time (hour, minute, seconds) and press the ENTER key.
5. Press the MODE key to return to normal operation.
Entering Shop Name And Address (optional)
1. Make sure the scale is plugged in, turned on and there is nothing on the platter.
2. Key in 9000 and press the MODE key. The display will show: P00 REGISTRATION
NOTE: If this does not appear on the display, press the RESET key to clear any data and do the step again.
3. Key in 5 and press the ENTER key.
4. Press the ENTER key again. Key in the store name (46 max. characters). NOTE: To enter one of the
characters (not a letter), press the SYMBOL FUNCTION key then press the appropriate character key. When
the entire store name has been entered press the ENTER key to save it.
5. Press the down arrow once.
6. Press the ENTER key. Key in the store address (this includes the street address, city, state, and zip)
(46 max. characters). NOTE: To enter one of the characters (not a letter), press the SYMBOL FUNCTION key
then press the appropriate character key. When the entire address has been entered press the ENTER key to
save it.
7. Press the MODE key to return to normal mode operation.
Initial Scale Set Up