7
6
•
Keep children away from playing with the device.
•
Do not pull the unit along by the cord.
•
If the supplied power cord is damaged it must be
replaced by an electrician or qualified person to
avoid any hazard.
•
The mains supply must confirm to the
specification shown on the rating label on the
back of the device.
•
Close doors and windows for optimal efficiency.
•
Keep curtains or blinds closed during the
sunniest hours of the day.
•
Do not turn on the device if you have discovered
damage to the appliance, cord or plug or if the
device is malfunctioning or if there are signs of
any other defect. Return the complete product to
the point of purchase or to a certified electrician
for inspection and/or repair. Always ask for
original parts. The device (incl. cord and plug)
may only be opened and/or repaired by properly
authorized and qualified persons.
•
Only a licensed professional is allowed to
dismantle or modify the device.
•
This device is to be used only for its prescribed
purpose. Any other use is deemed to be a
cause of misuse. The user/operator, not the
manufacturer will be liable for any damage or
injuries of any kind caused as a result of this
Installing the device
Unpack the device and remove the packing
materials from the unit. Store the packing
materials for possible future transportation.
Plug in the adapter to the connector that’s
located on the back side of the device.
Press and hold the power button for 3 seconds
the turn on the device.
Note
:
When powering on for the first time, the
vertical swing will only be activated after 10 seconds
due to calibration.
Installing the remote control
Remove the lid
Place the battery according to the instructions
on the lid with the correct polarity
Close the lid
Note:
• Only use 1x CR2025 3V batteries
• Non-rechargeable batteries are not to be recharged
• Exhausted batteries are to be removed from the
remote control and safely disposed of
• If the remote control is to be stored unused for a
long period, the battery should be removed
• The supply terminals are not to be short-circuited.
1
2
3
3. Maintenance
power
Fan
Timer
Swing
1 2 3
1 3
1 2 3
1 3
Cleaning the body
Use a soft, damp cloth to wipe the body clean.
Never use aggressive chemicals, gasoline,
detergents, chemically treated cloths, or other
cleansing solutions. These all could possibly hurt
the casing material.
Cleaning the fan blades
Follow below instructions to clean the fan blades:
Remove the screws from the back side of the
unit as shown in the picture
Rotate the outside cover to unlock the grill and
remove it
Disassemble the fan blades from the motor as
shown in the picture.
Important:
Always unplug the device from the
mains before cleaning. To maximize the efficiency of
the device, clean regularly
1
2
3
EN
1
2
3
1
2
3
