Globalstar STX3, Руководство пользователя

Страница: 20 / 32

18 18
REGULATORY APPROVAL
The STX3 Dev Kit is not designed for nor meant to be used in a finished end product for re-sale. While the
Globalstar STX3 Module installed in the STX3 Dev Kit meets all applicable FCC, IC and CE RED regulations for
a satellite transmit module, the STX3 Dev Kit has not been tested for compliance within the limits specified the
FCC or other regulatory agencies. Users are responsible for compliance with all international, national, state, and
local laws, rules, and regulations that apply to the handling or use of the STX3 Dev Kit by a user or the user’s
employees, affiliates, contractors, representatives, agents, or designees. This includes interference with any radio
communications. A sale of the STX3 Dev Kit is limited to product developers, software developers and system
integrators for the purpose of evaluating the Globalstar STX3 module. The kits are not intended for consumer or
household use.
The STX3 module has received regulatory approvals for modular devices in the United States and Canada.
Modular device approval allows the end user to place the STX3 module inside a finished product and not require
regulatory testing for an intentional radiator (RF transmitter), provided no changes or modifications are made to
the module circuitry. Changes or modifications could void the user’s authority to operate the equipment. The end
user must comply with all of the instructions provided by the Grantee, which indicate installation and/or operating
conditions necessary for compliance. The integrator is still responsible for testing the end product for any additional
compliance requirements required with this module installed (digital device emission, PC peripheral requirements,
etc.) in the specific country that the end device will be marketed. For more information on regulatory compliance,
refer to the specific country radio regulations in the following sections and/or a certified regulatory compliance
testing company.
RADIO ASTRONOMY SITE AVOIDANCE
The end user device must comply with the requirements for Radio Astronomy Site avoidance as specified by the
Globalstar National Science Foundation agreement of 2001. It must be compliant with CFR25.213.
REGULATORY NOTICES
FCC NOTICE: The STX3 Dev Kit is designed to allow:
(1) Product developers to evaluate electronic components, circuitry, or software associated with the STX3 Dev Kit
to determine whether to incorporate such items in a finished product and (2) Software developers to write software
applications for use with the end product. The STX3 Dev Kit is not a finished product and when assembled may not
be resold or otherwise marketed unless all required FCC equipment authorizations are first obtained. Operation is
subject to the condition that the STX3 Dev Kit does not cause harmful interference to licensed radio stations and
that the STX3 Dev Kit accepts harmful interference. Unless the assembled STX3 Dev Kit is designed to operate
under part 15, part 18 or part 95 of this chapter, the operator of the STX3 Dev Kit must operate under the authority
of an FCC license holder or must secure an experimental authorization under part 5 of this chapter.
The STX3 module has received Federal Communications Commission authorization under FCC Rules Part 25
as a modular transmitter. Final installation must be in compliance with 25.213 (see 6.1 above). The installation
and operating configurations of this transmitter must satisfy MPE categorical Exclusion Requirements of 2.1091.
The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all
persons and must not be collocated or operating in conjunction with any other antenna or transmitter.