GlobalSat Pty Ltd | ABN 12 067 562 314
Inmarsat BGAN Satellite Coverage Map
In order to find the satellite, it’s best to refer to the satellite coverage map below before you
begin the power on & pointing procedures.
Switch on the SATweb EXPLORER 510
The SATweb EXPLORER 510 has an internal battery, which is
recharged when external 240V AC or DC power is connected to
the DC input.
To switch on the EXPLORER 510:
1.
Push and hold the power button for 2 seconds until the
Status LED flashes rapidly green.
2.
When the Status LED flashes slowly (power on) or is
constant green (power on with DC input), the SATweb
EXPLORER 510 is ready for use.
NOTE:
Once turned on, you will hear a high pitch sound from the SATweb EXPLORER 510 which
indicates it is in pointing mode and is ready to find the satellite. At this point, you should be
outside with a clear view to the sky. To switch off, hold the power button for 2 seconds until
the Status LED flashes rapidly yellow (closing down).
