GPS Mouse User’s Manual
5. USING / TESTING YOUR GP
Once the GPS receiver’s driver and your personal mapping software have been
installed and configured properly, you can begin to use your navigation system by
plugging the receiver into your laptop
software, we’ve included a GPS test utility called “GPS
confirming your installation and configuration.
This utility can be installed by executing “GPS
downloaded from our website
LED Status indicator on the USB GPS
LED OFF:
GPS receiver is off (no power).
LED ON (solid)
: No fix, searching for GPS signals.
LED FLASHING:
Position fix established and GPS signals are being received.
Recommended installation location
Always select an area in the vehicle where the GPS unit will be secure and not
obstruct normal driving, visibility and safety, but still maintaining a “view to the sky”
in order to receive satellite data.
GPS information function test setting
1. Run
GpsInfo.exe
to load the utility.
2. Enter the proper COM port for your GPS device (see COM Port
above)
3. Set COM port to Baud rate:
4. If no errors have been made in configur
displayed in the window, which is
between the GPS device and the “GPSinfo” software is working properl
5. If there is no GPS data displayed (or dat
exit the software and unplug the GPS receiver from USB port and reinsert it after
10 seconds to reset the device.
NOTE
: The correct COM port
mapping software must be completed
8
5. USING / TESTING YOUR GPS RECEIVER
GPS receiver’s driver and your personal mapping software have been
installed and configured properly, you can begin to use your navigation system by
into your laptop. If you don’t have a mapping, or navigation
d a GPS test utility called “GPSinfo” for the purpose of
confirming your installation and configuration.
n be installed by executing “GPSinfo.exe” file in Windows and can be
downloaded from our website,
https://www.globalsat.com.tw/
.
tatus indicator on the USB GPS
GPS receiver is off (no power).
: No fix, searching for GPS signals.
Position fix established and GPS signals are being received.
installation location of the receiver:
Always select an area in the vehicle where the GPS unit will be secure and not
obstruct normal driving, visibility and safety, but still maintaining a “view to the sky”
in order to receive satellite data.
mation function test setting:
to load the utility.
Enter the proper COM port for your GPS device (see COM Port
Set COM port to Baud rate: 115200
If no errors have been made in configuration, there should be GPS data
displayed in the window, which is the confirmation that the communication
between the GPS device and the “GPSinfo” software is working properl
5. If there is no GPS data displayed (or data with multiple zeros in them),
unplug the GPS receiver from USB port and reinsert it after
10 seconds to reset the device.
COM port configuration between the GPS Device
software must be completed before using the software for the first time.
GPS receiver’s driver and your personal mapping software have been
installed and configured properly, you can begin to use your navigation system by
If you don’t have a mapping, or navigation
nfo” for the purpose of
file in Windows and can be
Position fix established and GPS signals are being received.
Always select an area in the vehicle where the GPS unit will be secure and not
obstruct normal driving, visibility and safety, but still maintaining a “view to the sky”
Verification
ation, there should be GPS data being
irmation that the communication
between the GPS device and the “GPSinfo” software is working properly.
a with multiple zeros in them), please
unplug the GPS receiver from USB port and reinsert it after
the GPS Device and your
software for the first time.
